Stainless Steel Hose Fittings

Stainless Steel Hose Fittings

Stainless Steel Hose Fittings
  - Medium Pressure Smooth Bore Hose  
Medium pressure (3000 PSI) hose is used in a wide spectrum of demanding compressed gas and industrial applications. It consists of an inner core of PTFE reinforced by an outer layer of stainless steel wire braid for strength and protection. Series SB hose is available in a non-conductive as well as a conductive core with a standard wall thickness of .030” or a heavy wall thickness of .040”.
 - Medium-High Pressure Smooth Bore Hose  
Medium-high pressure (4000 PSI) hose is a popular choice for use as pigtails in the compressed gas industry. These hoses are also ideal for use in the steel industry where they are subjected to rapid rate impulses that are common on tapping jacks, mud guns and Continuous Caster hydraulic systems. Series MHP hose has a conductive core surrounded by two layers of stainless steel wire braid. Our larger diameter hoses have up to four layers of stainless steel wire spiral wrap for added strength.
  - High Pressure Smooth Bore Hose  
High pressure (5000 PSI) hose is used in a variety of applications, such as hydraulics, compressed gases, R.I.M. (reaction injection molding machines), urethane transfer and hot melt glue. Series HP hose has a conductive core with a single layer of stainless steel wire braid in the smaller diameters. Larger diameters are double-braided.
 
 Convoluted Pressure Rated Hose
Our pressure rated convoluted hose is a popular choice for demanding applications in the chemical processing, pulp and paper, automotive and turbine engine industries. Series WCP is a helical, convoluted, non-conductive hose externally reinforced with PTFE impregnated fiberglass under a stainless steel wire braid reinforcement. Series BCP is similar but is made of conductive PTFE.

 

+